Soil pH Meter, 3-in-1 Soil Tester Kit with Moisture,Light and PH Test for Garden, Farm, Lawn, Indoor & Outdoor (No Battery Needed)
3-in-1 soil moisture metre combines moisture meter, pH acidity, and light sensor. This device let you know when you need to water your plant, when to control the soil pH and whether your plants are getting adequate sunlight.
Gardening is a wonderful hobby that brings joy, beauty, and delicious fruits and vegetables to our homes. However, it can also be a source of frustration when plants don’t seem to be thriving despite our best efforts. One of the main reasons for this is that plants have specific needs when it comes to soil pH, moisture, and light intensity, and if these needs aren’t met, the plant can become stressed and may not grow properly.
This is where our 3-in-1 soil pH, moisture, and light tester comes in. With just one tool, you can easily test and adjust the soil pH, moisture levels, and light intensity to ensure your plants are getting the right amount of each.
Let’s start with soil pH. The pH level of soil refers to how acidic or alkaline it is, with a pH of 7 being neutral. Different plants have different pH preferences, for example, azaleas and blueberries prefer a more acidic soil with a pH of around 5.5, while tomatoes and cucumbers prefer a slightly more alkaline soil with a pH of around 6.5. By using our 3-in-1 soil pH tester, you can easily determine the pH level of your soil and make adjustments accordingly.
Moisture is also crucial for plant growth. Over watering can lead to root rot, while under watering can cause the plant to wilt and become stressed. By using our 3-in-1 moisture tester, you can easily check the moisture level of your soil and ensure that your plants are getting the right amount of water.
Lastly, light intensity is also important for plants. Different plants have different light requirements, for example, succulents and cacti prefer bright, direct sunlight, while ferns and African violets prefer more indirect light. By using our 3-in-1 light tester, you can easily determine the light intensity of your garden or indoor plants and make adjustments accordingly.
Using our soil tester is a breeze. With no batteries or charging required, simply insert the probes into the soil 2-4 inches deep and read the value indicated by the pointer. Our double-needle detection technology ensures quick and accurate readings, so you’ll know exactly when to water your plants, how to control the pH value, and whether your plants are getting enough sunlight.
Our soil tester is not only easy to use, but also reliable. With a pH range of 3.5-8 (3.5-6.5 for acidic and 7-8 for alkaline), a moisture range of 1-10 (1-3 for dry, 4-7 for normal, and 8-10 for wet) and a relative light range of 0-2000 lux (0-200 for low, 200-500 for low+, 500-1000 for normal, and 1000-2000 for high). It also compact and easy to carry around with a product size of 10.2 x 2.3 x 1.5 inches, copper probe diameter of 0.2 inch, aluminum probe diameter of 0.2 inch, probe length of 6.9 inches and distance between probes of 0.5 inch.
3-in-1 FUNCTION – Can test soil moisture, pH value, and sunlight level of plants, quickly helping you to know the soil condition and do adjustments for better plant care.
EASY to USE – This soil tester works by sensing the moisture and chemical ions of the soil, no battery need, no need to be charged either, just plug the probes into the soil about 2-4 inches, then you will easily read the value shown by the pointer at a quick time.
PRACTICAL and RELIABLE: Double-needle Detection Technology strongly enhances the speed and accuracy of detecting and analyzing soil moisture and pH acidity, you can read the accurate value at a quicker time, helping you know when you need to water your plant, how to control the pH value in the soil and whether it gets adequate sunlight.
- pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline) Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet)
- Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh) Product Size: 10.2 x 2.3 x 1.5 inches Copper Probe Diameter: 0.2 inch Aluminum Probe Diameter: 0.2 inch Probe Length: 6.9 inches Distance Between Probes: 0.5 inch Product Weight: 2 oz/60g
How To Use
- Step 1: Switch moisture/pH/light position
- Step 2: Stick the probe into the soil about 2-4 inches
- Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
- Step 4: No need to wait, get the reading of moisture/pH/light level on the dial directly Step 5: Remove probe from soil and wipe clean after each use.
- Designed for testing soil only.
- Do not force it into very hard soil or touch hard objects.
- If the soil is too dry, the ph function will not work, please water the soil first and test again.
- Don’t leave the meter in the soil for a long time.
- Wipe and clean the probe after each use.
- Measurement of moisture light and pH must be viewed while the unit is in the soil.